For Personal Static Protection Fan-Type Ioniser Ionising Air Blower 110V 60Hz

Description

Vehicle Information:
Product Specification:
Voltage: 110v/60Hz
Ion balance: 0V±10V (AVE) 30cm
Static elimination time: less than 2.5 seconds
Wind speed: 60-190CFM (adjustable)
Airflow area 23.6*35.4 inches (60*90 cm)
Ozone emission 0.03PPM (low air speed, 5.9 inches before fan measurement)
Operating environment 32-104℉, humidity: 35~80RH (no condensation)
Power Consumption: 45W (Cold air speed) ~ 380W (Warm air speed)
Product Dimension (L*W*H): 18.5*8.1*7.3 inches (470*205*186 mm)
Net weight: 13.2 lbs (6kg)
Operating Noise: 50dB~90dB
Package Includes:
1* Ionising Air Blower
Description:
▲The fan-type ioniser is versatile and prevents electrostatic contamination and damage. It is ideal for use in the field of personal static protection in electronic production lines and service stations.
▲Fast elimination of static electricity: wind power can be adjusted at will, freely controlled, no gear limitations, and wide airflow coverage. It is commonly used in flat panel display assembly and test procedures.
▲Built-in Ion Needle Cleaning Brush: The fan has a built-in Ion Needle Cleaning Brush, just slide the cleaner slider left or right to clean the dust accumulated on the Ion Needle, which effectively reduces the failure rate of the Ion Fan and extends the service life of the Ion Fan.
▲Warm Air Switch and Wide Air Output up to 190 CFM: The warm air function can be turned on or off as needed. Please note that the temperature of the warm air function is only around 77℉. The airflow can reach up to 190 CFM wide output.
▲Application Scenarios: Eliminate static electricity from liquid crystal modules, containers, resin-moulded products, static electricity from chips on trays, and static electricity during battery production. Prevents dust from adhering to the substrate.
Note:
Please allow the slight colour difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
Shipping Policy
Payment Method
Returns Policy
Shipping Policy
-Please leave us your full name, your telephone number and detailed address when ordering.
-We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay the order.
-We try our best to pack the products as good and safe as possible ,so they always arrive in a good condition.
-The items will be the shipped the same working day for the order before 10:00 a.m.
-The items will be the shipped the other working day for the order after 10:00 a.m.
Payment Method
-We accept PayPal only.
-All major credit cards are accepted through secure payment processor PayPal.
-Payment must be received within 4 business days of auction closing.
Returns Policy
-We offer sophisticated products at a high technological level, with the highest possible quality and the most favorable price.
-With these parts you can replace your defective parts simply plug and play.
-Our warranty is valid for max. 24 months without mileage limitation.
-Please compare carefully with Photos or OE number before purchasing the part.
-Once a problem occurs with the purchased product, please do not hesitate to let us know with Ebay messages,we will offer you refund or replacement.
Product View
Vehicle Information:
Product Specification:
Voltage: 110v/60Hz
Ion balance: 0V±10V (AVE) 30cm
Static elimination time: less than 2.5 seconds
Wind speed: 60-190CFM (adjustable)
Airflow area 23.6*35.4 inches (60*90 cm)
Ozone emission 0.03PPM (low air speed, 5.9 inches before fan measurement)
Operating environment 32-104℉, humidity: 35~80RH (no condensation)
Power Consumption: 45W (Cold air speed) ~ 380W (Warm air speed)
Product Dimension (L*W*H): 18.5*8.1*7.3 inches (470*205*186 mm)
Net weight: 13.2 lbs (6kg)
Operating Noise: 50dB~90dB
Package Includes:
1* Ionising Air Blower
Description:
▲The fan-type ioniser is versatile and prevents electrostatic contamination and damage. It is ideal for use in the field of personal static protection in electronic production lines and service stations.
▲Fast elimination of static electricity: wind power can be adjusted at will, freely controlled, no gear limitations, and wide airflow coverage. It is commonly used in flat panel display assembly and test procedures.
▲Built-in Ion Needle Cleaning Brush: The fan has a built-in Ion Needle Cleaning Brush, just slide the cleaner slider left or right to clean the dust accumulated on the Ion Needle, which effectively reduces the failure rate of the Ion Fan and extends the service life of the Ion Fan.
▲Warm Air Switch and Wide Air Output up to 190 CFM: The warm air function can be turned on or off as needed. Please note that the temperature of the warm air function is only around 77℉. The airflow can reach up to 190 CFM wide output.
▲Application Scenarios: Eliminate static electricity from liquid crystal modules, containers, resin-moulded products, static electricity from chips on trays, and static electricity during battery production. Prevents dust from adhering to the substrate.
Note:
Please allow the slight colour difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
Shipping Policy
Payment Method
Returns Policy
Shipping Policy
-Please leave us your full name, your telephone number and detailed address when ordering.
-We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay the order.
-We try our best to pack the products as good and safe as possible ,so they always arrive in a good condition.
Payment Method
-We accept PayPal only.
-All major credit cards are accepted through secure payment processor PayPal.
-Payment must be received within 4 business days of auction closing.
Returns Policy
-We offer sophisticated products at a high technological level, with the highest possible quality and the most favorable price.
-With these parts you can replace your defective parts simply plug and play.
-Our warranty is valid for max. 24 months without mileage limitation.
-Please compare carefully with Photos or OE number before purchasing the part.
-Once a problem occurs with the purchased product, please do not hesitate to let us know with Ebay messages,we will offer you refund or replacement.
On Aug 2, 2024 at 01:34:27 PDT, seller added the following information: